With the new set up, I've tried to avoid holding anything back and went "all in" so to speak. So I got busy one night, wiring up this ultra safe system by Aquahub. The way it works: You have two float switches wired in series, which are powered with a 12v DC power supply. When the switches are down, a relay opens the flow to a 110v power cord to supply power a pump that can push top off water from a reservoir into the sump. As the water level rises, the float rises and cuts power to the relay, which stops power to the 110v cord shutting off the feed pump. If one float fails, the second one is a back up to make sure power is cut to the feed pump.
